solenoids from China manufacturer - Ningbo Yinzhou Tongli Hydraulic Electrical Factory

solenoids

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MFZ12A-YC/MFJ12A-YC

Delivery Date: 20

Certification: CE

Production Capacity: 1000000

Type: Others

Brand Name: Tonly

RF wet-type solenoid for valves are respectively used in control circuit of AC power with AC 50-60Hz, voltage up to 380V and of DC power with voltage.

Application:
RF wet-type solenoid for valves are respectively used in control circuit of AC power with AC 50-60Hz, voltage up to 380V and of DC power with voltage up to 220V, Both can be used with YUKEN threaded connection solenoid valves.

Specifications

Model \ Parameter	MFZ12A-40YC	MFZ12A-95YC	MFJ12A-26YC	MFJ12A-50YC
Rated force (N)	40	95	26	50
Rated stroke (mm)	3	4	3	4
Full Stroke (mm)	≥6.2	≥8.5	≥6.2	≥8.5
Power consumption (W)	30	36	30	40
Joint screw thread	M20×1	M24×1.5	M20×1	M24×1.5
Rated Voltage (V)	DC6-220V,AC110-380V
To withstand hydraulic (MPa)	Magnetic housing all can endure oil pressure of 21MPa
Insulation grade	Grade F

External Shape and Installing Dimension

Note:
Hydraulic solenoid adopts plug bases meeting the requirements of the ISO4000 or DIN43650 standard. The user can choose at his needs between the two specifications, including plug base with indicator light and plug base without indicator light. The voltage specification of the plug base with indicator light should conform to the voltage specification of the solenoid itself.
The manual jogger of the solenoid should be controlled by hand only in the debugging or critical situation. However, when the backing pressure of the system is pretty high and difficult to adjust, the user should use the cross head driver to slowly push the manual jogger instead of using impact force so as to avoid destroying the manual jogger and the surface of the direction hole which will cause the solenoid to leak the oil and unable to reset.
When the solenoid is used Bi-direction, it should be insured that the two solenoid cannot be electrified at the same time so as to avoid the malfunction of the solenoid.
Overcurrent protection system should be used in the connection part between electric control system and solenoid so as avoid burning the solenoid and electronic control units under improper condition.

Explanation Of Sample:
If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
If the application is beyond the catalogue,please contact with us.
The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by Tonly.